The Enviropod LittaTrap catchpit filter was amongst a number of other Approved Full Capture Devices involved in a pilot study by the City of Lincoln in preparation of a Full Trash Capture Implementation Plan to meet their MS4 permit .
The City of Lincoln is a city in Placer County, California, part of the Sacramento metropolitan area. Located in an area of rapid suburban development, it is one of the USA's fastest-growing cities.
In line with their rapid growth, the City of Lincoln Public Works department approached Enviropod as they were interested in a pilot project using LittaTrap units. The department is responsible for controlling trash and debris from entering our waterways and was tasked to mitigate the pollution.
As a starting point to control the pollution, the city began at the catch basin inlet and piloted several certified Full Trash Capture devices at nine separate CB locations.
The LittaTrap was included with other Approved Full Capture Devices as part of this pilot project.
Brian Smull, the Lead Worker for Streets says, " I started with a mock program, picking multiple companies that had the same concept and state approval. The units I tested from the different companies were all different styles, some were stainless steel and the other was LittaTrap’s material."
Brian says, "We are only required to catch 5mm particles at this time, and the LittaTrap has been catching cigarette butts, garbage bags, plastic bottles, leaves, and grass from the landscapers.”
The City was very impressed with the performance of the LittaTrap in the pilot study, as Brian states, "It is a great product, and I recommend it for anyone that is trying to control debris and trash from entering the waterways.”
They have subsequently installed LittaTrap units in their corporate yard and further full capture across additional locations as they roll out their Full Trash Capture Implementation Plan to meet their MS4 permit.
"My name is Brian Smull with the City of Lincoln, I’m currently responsible for controlling trash and debris from entering our water ways. There has been multiple ways that the city has been told how we can mitigate the pollution and the city decided to go with starting at the inlet, since all Inlets are maintainable from a one- two person operation, instead of needing a vactor truck one person can do it by hand if they want. I started with a mock program, picking multiple companies that had the same concept and state approval. The units I tested from the different companies were all different styles, some were made with stainless steel and the other was LittaTrap’s material.
I tested the stainless steel unit from the different company, which I picked because of my thought process of durability and strength. I did all the correct measurements of where I wanted the units placed and I thought it was going to be perfect, ill have my guys drop in place and walk on. That was a huge NO! my guys ended up spending 2-3 hours placing these units because the steel cage did not have any movement, every inlet I went to was different, same measurements but the little imperfections when they poured in place the concrete in the main design of the street. So that one didn’t work for me.
In comparison, LittaTrap can be installed in less than 10 minutes with a two man crew and the units material is forgiving, fitting in any application as long as you get the correct size of unit. Durability and strength was very questionable to me at first glance, I thought to myself it looked kind of flimsy and week to hold up the weight with two anchor bolts. BOY!! was I wrong, I put it to the test and installed the bracket and anchor bolts and I stood on each side of the bracket so it was holding all of my 240 lbs, with no problems at all. We are only required to catch 5mm particles at this time and LittaTrap has been catching cigarette butts, garbage bags, plastic bottles, leaves and grass from the landscapers.